TOPIC:  ANSI PRINTER STATUS QUERY CONFLICT - WY60 SENDS WRONG CODE.

DATE:     08/22/89

PRODUCT:        WY-60

THE ISSUE:
        ANSI Printer status query conflict -- WY60 sends wrong code.

OVERVIEW:
        Some operating systems, particularly Vax/VMS, check the aux
        port for a printer with an esc [ ? 15n.  The WY-60 currently
        will respond with an Esc [ ? 10n or "printer ready" message.

RESOLUTION:
        This is a hardware problem.  Your only option to change this
        would be to tie pin 3 to pin 20 on the aux port.  This will
        set the message to an esc [ ? 11n or printer busy.  This
        hardware problem doesn't exist on the WY99GT, WY150 or WY160.
        These terminals have the capability of sending an esc [ ? 13m
        or "no printer connected".

=-=-=-=-=-=-=-=-=-=-=-=-=- DISCLAIMER =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  This information is intended to inform WYSE personnel and WYSE
  customers of certain issues in a timely fashion. The information
  has not been extensively verified or tested. WYSE does not warrant
  the information to be correct, although reasonable effort has been
  taken to prevent gross inaccuracies. WYSE publishes formal technical
  communiques in the form of Product Bulletins and warrants the data
  in Product Bulletins to be accurate at the time of the release.